30+ years of experience
Complete DIY Installation Kits for Heat Recovery Ventilation
Now you can capture and reuse the heat/chill you’ve already paid for… using one of EnergyLabs’ DIY* complete and easy installation kits (*with the help of any licenced electrician).
How?
EnergyLabs offers Complete Heat Recovery Ventilation Kits – making it easy for you to install (with no missing parts) and get your heat recovery ventilation system up and running:
For habitable floor areas of up to 70m2 choose the 2-units kit. For areas of up to 140m2 choose the 4-units kit, up to 210m2 choose the 6-units kit and up to 280m2 choose the 8-units kit.
Not sure and want expert help? Get our expert design service ($179), send us your house plans and we’ll prepare a custom design of your heat recovery ventilation system for best performance, including a detailed list of parts and complete with pricing.
SMALL Compact Storage Hot Water Heater 1-Phase SHC 10
Made in Germany, the 10 litre Stiebel Eltron SHC 10 AUunder bench mains pressure water heaters deliver hot water quickly to kitchen sinks and taps.
These point of use water heaters eliminate long runs of pipework for isolated sinks and basins and can greatly reduce the waiting time for hot water to arrive at the outlet. Installed directly underneath the basin or sink these water heaters are compact in design to take up less space in the cupboard.
Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements
Features & Description
High quality design
- Made in Germany with premium quality parts
- Certified enamelled steel tank manufactured by Stiebel Eltron in Germany
- Designed for 2+ fixture outlets
- WaterMark approved. Lic No. WMKA00301, AS3498
Energy and water saving
- Low minimum standby power consumption
- Installed close to the point of use helps save water
Easy installation
- Compact space saving design
- Installed underneath sinks or basins, ideal for multiple points of use
- 230V - 3 pin power cord with earthed plug 6.5 Amp
- Operates with all WELS approved tap-ware
- Temperature set to 60°C (not suitable for bathrooms)
- Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements
Warranty
- 5 year cylinder, 3 year parts & labour and 1 year PTR valve domestic water heater warranty
- 1 year commerical water heater warranty
Available in 10 litre (SHC 10 AU) or 15 litre (SHC 15 AU) tank capacity.
Kit Contents
Included in Kit:
- Compact Mains Pressure SHC Water Heater
- Installation kit (PTR valve, washers, etc.)
Possibly required on-site according to installation type:
- Cold Water Feed Isolation Valve
Learn More: Hot Water Heat Pump Knowledge
White Paper by Stiebel Eltron -> The Benefits of Decentralising Hot Water Systems in Multi-residential Buildings
Video by Stiebel Eltron -> Why use an instantaneous water heater?:
FAQ
- What else do I need to complete the installation? Generally all that's required is a power supply and a drain point for the Pressure/Temperature Relief Valve... apart from this, nothing, we send out a kit that can be installed immediately. Please note that to comply with regulations some installation types may require additional valves (see above in Kit Contents).
- What is the warranty on the water heater? Stiebel Eltron provides a 5-year domestic warranty, and a 1-year commercial warranty on the SHC 10 & 15 units.
- Does the SHC need a tempering valve to limit the hot water to 50 degrees Celsius? If used at Kitchen and Laundry sinks, then no, the SHC hot water system does not require a tempering valve. The unit delivers hot water at 60 degrees Celsius. This unit is not suitable for hygienic areas (such as bathrooms) where the water must be limited to not exceed 50 degrees Celsius.
- What's the difference between the different SHC water heater models? The only difference is in the storage tank capacity, otherwise they both work the same.
- Can I install the SHC water heaters with my existing sink mixer? Yes, the SHC water heaters are mains pressure storage water heaters and can be used with all WELS rated tap-ware including low flow taps.
- Can I connect two taps to the SHC mains pressure water heater? Yes, the SHC water heaters are designed as a multipoint of use water heater and can be operated with multiple taps.
- Do these water heaters create hot water that is hot enough to make tea and coffee? No, the SHC is designed to provide hot and cold water to a sink. These units are not a boiling or chilled system.
- What happens after I order the unit and pay? We will be in contact with you to confirm the order, delivery address and timeframe, and any other questions you may have.
- How long until I receive my order, and is there a delivery fee? Within Australian state/territory capital cities delivery is free (excluding Darwin), and your order will usually arrive within 3 business days. For orders outside of capital cities, we offer a flat-rate fee of $200 for delivery.
Additional Products
- Highly Effective Water Filtration Systems by Stiebel Eltron available at Stiebel Store
- Complete Installation of this Water Heater (Perth only) from $500.00+GST by Euroheat Australia
Technical Data
| Model number | SHC 10 | SHC 15 |
| Tank Capacity | 10L | 15L |
| Rated Output (415V) | 1.6kW | 1.6kW |
| Rated Current (415V) | 6.8A | 6.8A |
| Connection | 1/N/PE | 1/N/PE |
| Fuse Protection | 10A | 10A |
| Mixed water volume at 40°C | 15.3L | 23L |
| Temperature Settings | 60°C | 60°C |
| Water Connections | G 1/2 A | G 1/2 A |
| Max. Permissible Pressure | 700kPa | 700kPa |
| Supplied PTR Valve | 700kPa | 700kPa |
| IP Rating | IP24 D | IP24 D |
| Height | 498mm | 523mm |
| Width | 280mm | 320mm |
| Depth | 270mm | 318mm |
| Weight | 17.2Kg | 24.0Kg |
| Colour | White | White |
Downloads
SHC AU Operation and Installation Guide PDF 2.43 MB
SHC 10 AU / SHC 15 AU Warranty PDF 110.93 kB
STIEBEL ELTRON Brochure SHC PDF 830.58 kB
This is
When do DIY Installation Kits make sense and why
Why is it easy to install?
You don’t need any ducts – you will get a few in-wall units which talk to each other and simultaneously extract stale air and supply fresh air into the room, while recovering as much energy as possible during the process.
Decentralised heat recovery ventilation solutions are ideal for retrofitting to existing buildings, or new buildings that have minimal ceiling or roof space available. This is because with a decentralised system there are no ducts to run – there are simply a few in-wall units which talk to each other and simultaneously extract stale air and supply fresh air into the room, while recovering as much energy as possible during the process.
How is the EnergyLabs’ Complete Heat Recovery Ventilation Kit different to standard ventilation?
There are two main types of ventilation systems in Australian buildings: extraction-only air systems and supply/extract air systems.
The simplest and cheapest method for ventilation is an extraction-only air system. This is the system you will recognise from almost all houses in Australia – unwanted air is removed via ducts from areas such as the kitchen, bathroom and toilet. But the air that is extracted and pushed out from the building must then be replaced somehow… and this replacement air from outside has traditionally just seeped its way into the building via the small openings and cracks around windows, doors, ceiling & roof, etc.
Now in theory this simple and cheap way works, but the air that is getting sucked into the house through all the openings and cracks is costing us money. In winter this air is cold, and therefore we have to pay to heat it up… and the same is true in summer – the air coming in is hot, and we have to pay to cool it down.
But unlike an extraction-air system, a supply/extract system first strips the unwanted extract air of its thermal energy, and then it transfers the majority of this energy to the fresh air that is being supplied into the building. And to achieve this a pair (or pairs) of decentralised heat recovery ventilation units can help you.
How does the whole EnergyLabs’ Complete Heat Recovery Ventilation Kit work? (and why it will save you money)
For example in winter the outside air may be 7°C, but inside your home it’s a comfortable 21°C. A simple extraction-only air system would exhaust to the outside 21°C air from your house, and then draw in 7°C air from outside… which can be uncomfortable for those inside, but most of all costs you money to heat up this cold air to 21°C again.
However, a supply/extract air system would in this situation extract the heat from the stale 21°C air first, and only then exhaust it at ~9°C. The fresh incoming cold air from outside would be at 7°C before it passes through the special crossflow heat exchanger, but then it’s supplied into your home at 19°C… meaning you don’t experience discomfort and you dramatically save on your heating bills, while having high quality (and filtered) fresh air supplied throughout your home.
It’s important to remember that heat recovery ventilation systems do not actively heat or cool your home – they only help you keep more of the energy you already have in your home while enjoying clean fresh air and minimising your energy bills. (Some HRV systems do however have night purge, which during summer allows you to pump out any warm air from inside your home, and replace it with cool night air)
When to get the EnergyLabs’ Complete Heat Recovery Ventilation Kit
FAQ
What else do I need to complete the installation? Apart from some screws, power, and some low voltage cabling between the units and controller, nothing extra is required, we send out a complete kit that can be installed immediately.
What is the warranty on the HRV unit and the system? Stiebel Eltron provides a 2-year warranty on all components supplied.
How do I know where to put the vents and install the different system parts? We offer a free design service with every purchase – just supply us with your building plans and we send you back the design.
What happens after I order the unit and pay? We will be in contact with you to confirm the order, delivery address and timeframe, system design (if required), and any other questions you may have.
How long until I receive my order, and is there a delivery fee? Within Australian state/territory capital cities delivery is free (excluding Darwin), and your order will usually arrive within 5 business days. For orders outside of capital cities, we offer a flat-rate fee of $200 for delivery.
At our parent company Euroheat Australia we’ve been engineering, installing, and servicing heating, cooling, hot water, and ventilation equipment for 30+ years. And since we’ve used them and know which products work best, the EnergyLabs promise is simple: what you get has passed the test.
Copyright 2024 , all rights reserved.