If you’re having problems with your air source heat pump water heater, don’t worry – it’s usually easy to troubleshoot and fix. Here are some of the most common issues and how to resolve them.
Firstly, check if the heat pump is getting power. If it isn’t, this could be due to a fuse being blown or a tripped circuit breaker. If this is the case, reset the breaker or replace the fuse and you should be good to go.
If the power is on but there’s no hot water, the problem may be due to a faulty thermostat or pressure switch. You can try resetting these by turning off the power, waiting for 30-60 seconds and then turning it back on again. If that doesn’t work, you’ll need to check your user manual for instructions on how to replace these parts.
Sometimes an air source heat pump stops working because of an issue with its filters – they can become clogged over time as dirt and other particles build up in them. To clean them, remove them from your heat pump and rinse them in cold water until all of the dirt has been removed and then put them back in place.
Another common issue is that your air source heat pump may not be producing enough hot water for your needs – especially during winter when temperatures are lower than usual. This can be caused by a build-up of ice around the unit’s compressor coil – which reduces efficiency – so you’ll need to defrost it before turning it back on again by following instructions in your user manual.
Finally, if there are any strange noises coming from your air source heat pump when it’s running, this could indicate that something has gone wrong inside it – such as a damaged fan or motor – so you’ll need to get an engineer out to take a look at what’s going wrong before using it again.
Hopefully this advice will help you get your air source heat pump up and running again soon!