How Much Space Do I Need For A Heat Pump Hot Water System?

When considering a heat pump hot water system for your home, one of the most important pieces of information you need to know is how much space you need for it. As with any kind of hot water system, there are certain requirements when it comes to installation and positioning.

The first thing you need to consider is where you’re going to be putting the heat pump. It needs to be located in an area outside your home where there’s plenty of air flow and direct sunlight. This could be on a patio, balcony or even a roof – just make sure the location is free from obstacles and is easily accessible.

Once you’ve chosen the spot, you’ll need enough space around it to install the unit itself. Most heat pumps require at least one metre of clearance around them and should be well ventilated on all sides. If it’s located indoors, make sure there’s enough room for air circulation so that it can run efficiently.

You should also bear in mind that some manufacturers require specific distances between the heat pump and any nearby walls or objects. For example, if your model has a fan noise rating of 50dB, then it needs to be installed at least two metres away from any walls or objects that absorb sound waves – this is so that noise levels remain below this figure.

Finally, if your model requires a condensate drain pipe, then make sure you leave enough space around it for the pipe to run from your heat pump to an outside drainage point without obstruction or kinks in the pipe work.

When it comes down to it, how much space you need for a heat pump hot water system really depends on what type of model you choose and where you want to install it. It pays to do your research beforehand so that you can ensure that all requirements are met before installation begins – this way both safety and efficiency will be optimised!

Free Delivery to Australian Capital Cities*
Flat Rate Delivery of $200 Outside of Capitals