SMALL Instantaneous Hot Water Heater 1-Phase DHC-E 8/50
Compared to electric hot water storage systems, instantaneous hot water heaters can be up to 30% more efficient. How is this if they both use electricity as the heat source? Well its simple - electric hot water storage units hold a lot of hot water inside them and have a very large external surface area. Even though the outside of the tanks are insulated, heat is still lost through the insulation, the tank valves and connections into the external atmosphere (or inside in your cupboard). Instantaneous water heaters don't have this problem - they heat water instantly only when you need it.
The DHC-E 8/50 is suitable for supplying hot water to a single draw-off point, e.g. supply only to a bathroom or a kitchen.
And because it's an instantaneous water heater you'll have endless hot water - it never runs out.
Hot Water Output Information
Features & Description
- Modern carbon look design
- Electronically controlled
- Three selectable temperature outputs for greater convenience
- Tubular heating element
- WaterMark approved, Lic. No. WMKA21273, AS3498
Installation flexibility
- Delivers a maximum of 50°C hot water in accordance with AS3498
- No safe tray or drainage required (check local regulations)
- Space saving compact design
Save water and energy
The DHCE compact water heater utilises electronic control that helps to save energy and water compared to older style hydraulically controlled instantaneous water heaters.
In addition, the compact design allows for close to the point of use installation to help save water by reducing the time it takes to deliver hot water to the outlet. The advantage of an instantaneous water heater is that no heat is lost, and energy wasted, to store hot water at temperature. Energy is only required to heat water when the hot water outlet is switched on.
Available in two electrical sizes:
- DHCE 6/50 - 7.1kW, 30 Amps, single phase 240V
- DHCE 8/50 - 9.5kW, 40 Amps, single phase 240V
Warranty
- 5 year full parts and labour domestic warranty
- 1 year full parts and labour commercial warranty
Kit Contents
Included in Kit:
- Instantaneous DHC-E water heater
- Installation kit (wall bracket, washers, etc.)
Possibly required on-site according to installation type:
- Cold Water Feed Isolation Valve
- Pressure Limiting Valve
Learn More: Hot Water Heat Pump Knowledge
White Paper by Stiebel Eltron -> The Benefits of Decentralising Hot Water Systems in Multi-residential Buildings
Video by Stiebel Eltron -> Why use an instantaneous water heater?:
FAQ
- What else do I need to complete the installation? Generally all that's required is a power supply and space for the installation... apart from this, nothing, we send out a kit that can be installed immediately. Please note that to comply with regulations some installation types may require additional valves (see above in Kit Contents).
- What is the warranty on the water heater? Stiebel Eltron provides a 5-year domestic warranty, and a 1-year commercial warranty on the DHC-E units.
- Does the DHC-E need a tempering valve to limit the hot water to 50 degrees Celsius? No, the DHC-E hot water system delivers hot water not exceeding 50 degrees Celsius in accordance with AS3498, overcoming the need for a tempering valve in hygienic areas where the water must be limited to not exceed 50 degrees Celsius.
- What's the difference between the different DHC water heater models? The only difference is in the water heating capacity, otherwise they all have the same functions.
- Where can the DHC-E instant hot water system be installed? The DHC-E water heater can be installed almost anywhere due to its compact size. The water heater does not require ventilation, relief drain or safe trays so it can be installed in a cupboard, in the roof space, below the sink, in a service cavity, in a Euro laundry just to name a few options. If installing outdoors, the hot water system must be protected from the elements by a protective covering such as a meter box.
- How far can the water heater be installed from the hot water outlet? The DHC-E water heaters are designed to be installed as close as practical to the most used hot water outlet. Installing closer to the point of use can help to save water and energy by delivering hot water quickly to the outlet.
- What happens after I order the unit and pay? We will be in contact with you to confirm the order, delivery address and timeframe, and any other questions you may have.
- How long until I receive my order, and is there a delivery fee? Within Australian state/territory capital cities delivery is free (excluding Darwin), and your order will usually arrive within 3 business days. For orders outside of capital cities, we offer a flat-rate fee of $200 for delivery.
Additional Products
- Highly Effective Water Filtration Systems by Stiebel Eltron available at Stiebel Store
- Complete Installation of this Water Heater (Perth only) from $500.00+GST by Euroheat Australia
Technical Data
| Model number | DHC-E 6/50 | DHC-E 8/50 |
| Rated Output (240V) | 7.1kW | 9.5kW |
| Rated Current (240V) | 29.6A | 39.6A |
| Connection | 1/N/PE/AC | 1/N/PE/AC |
| Fuse Protection | 32A | 40A |
| Switch on Flow Rate | 1.5L/min | 1.5L/min |
| Max Temperature | 50°C | 50°C |
| Water Connections | G 1/2 | G 1/2 |
| Max. Permissible Pressure | 1000kPa | 1000kPa |
| Max. Inlet Temperature for Reheating | 55°C | 55°C |
| IP Rating | IP25 | IP25 |
| Height | 360mm | 360mm |
| Width | 200mm | 200mm |
| Depth | 110mm | 110mm |
| Weight (when filled) | 2.45Kg | 2.45Kg |
| Colour | Silver | Silver |
Downloads
DHCE Operation and Installation Guide PDF 3.62 MB
DHCE 6/50 / DHCE 8/50 Warranty PDF 110.37 kB
STIEBEL ELTRON Tech Line Drawing DHCE 50 JPG 1.41 MB
STIEBEL ELTRON Exploded Diagram DHCE PDF 294.42 kB
Faq
EnergyLabs processes all orders within one day, and deliveries usually occur within 3 – 5 business days.
EnergyLabs ships from distribution centres in all states and mainland territories (exc. NT)
Shipping is free to Australian Capital Cities (Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart) excluding Darwin. For shipping outside of capital cities we offer delivery at a flat rate of $200.
All products offered by EnergyLabs come with manufacturer’s warranties that generally vary from 2 to 5 years depending on the product and brand.
For your piece of mind only reputable equipment that we know to be of good quality and reliable are offered by EnergyLabs.
Yes, we will do our best to deliver on a specific date, if you request it, but unfortunately cannot guarantee it.
EnergyLabs parent company Euroheat Australia offers installation in Perth and greater WA. EnergyLabs is happy to recommend good installers in your home city or state.