When it comes to ensuring your compact storage hot water heater is running at its most efficient, there are a few simple steps you can take to increase the flow rate and make sure you’re getting the best performance out of your appliance.
First, check the pipes connected to your hot water heater. Make sure they’re not clogged with debris or anything else that could be impeding the flow of water. Regularly flush or descale the system to keep it running at its peak efficiency.
Second, if you have an electric hot water heater, check to see if the thermostat is set at the right temperature. It’s usually recommended that you set it between 54-60 degrees Celsius for most efficient performance. If your thermostat is set too low, it will reduce the flow rate and cause poor performance from your system.
Third, make sure that your hot water tank is properly insulated. This will help regulate temperature and ensure that less heat escapes from the tank during use, meaning there’s more energy available for heating up the water. Insulating your tank also means that more heat transfers from the elements inside to heat up the stored water, so less energy is wasted in this process too.
Fourth, clean out sediment from time to time – sediment build-up can reduce flow rates and lead to inefficient operation of your system. You can do this by draining some of the stored water out of your tank every so often and flushing any unwanted material out with clean water afterwards.
Finally, keep an eye on your pressure relief valve – if it’s not releasing excess pressure like it should be then this could be reducing flow rates and causing inefficient operation in general. Make sure you follow manufacturer instructions when checking or changing any parts on your hot water heater so as not to void any warranties or cause damage yourself!
By following these steps you should be able to increase the flow rate of your compact storage hot water heater for improved efficiency and performance!