SMALL Compact Storage Hot Water Heater 1-Phase SHC 10
Made in Germany, the 10 litre Stiebel Eltron SHC 10 AUunder bench mains pressure water heaters deliver hot water quickly to kitchen sinks and taps.
These point of use water heaters eliminate long runs of pipework for isolated sinks and basins and can greatly reduce the waiting time for hot water to arrive at the outlet. Installed directly underneath the basin or sink these water heaters are compact in design to take up less space in the cupboard.
Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements
Features & Description
High quality design
- Made in Germany with premium quality parts
- Certified enamelled steel tank manufactured by Stiebel Eltron in Germany
- Designed for 2+ fixture outlets
- WaterMark approved. Lic No. WMKA00301, AS3498
Energy and water saving
- Low minimum standby power consumption
- Installed close to the point of use helps save water
Easy installation
- Compact space saving design
- Installed underneath sinks or basins, ideal for multiple points of use
- 230V - 3 pin power cord with earthed plug 6.5 Amp
- Operates with all WELS approved tap-ware
- Temperature set to 60°C (not suitable for bathrooms)
- Install Note - Safe Tray and drain required as per AS/NZS 3500.4.2 & local requirements
Warranty
- 5 year cylinder, 3 year parts & labour and 1 year PTR valve domestic water heater warranty
- 1 year commerical water heater warranty
Available in 10 litre (SHC 10 AU) or 15 litre (SHC 15 AU) tank capacity.
Kit Contents
Included in Kit:
- Compact Mains Pressure SHC Water Heater
- Installation kit (PTR valve, washers, etc.)
Possibly required on-site according to installation type:
- Cold Water Feed Isolation Valve
Learn More: Hot Water Heat Pump Knowledge
White Paper by Stiebel Eltron -> The Benefits of Decentralising Hot Water Systems in Multi-residential Buildings
Video by Stiebel Eltron -> Why use an instantaneous water heater?:
FAQ
- What else do I need to complete the installation? Generally all that's required is a power supply and a drain point for the Pressure/Temperature Relief Valve... apart from this, nothing, we send out a kit that can be installed immediately. Please note that to comply with regulations some installation types may require additional valves (see above in Kit Contents).
- What is the warranty on the water heater? Stiebel Eltron provides a 5-year domestic warranty, and a 1-year commercial warranty on the SHC 10 & 15 units.
- Does the SHC need a tempering valve to limit the hot water to 50 degrees Celsius? If used at Kitchen and Laundry sinks, then no, the SHC hot water system does not require a tempering valve. The unit delivers hot water at 60 degrees Celsius. This unit is not suitable for hygienic areas (such as bathrooms) where the water must be limited to not exceed 50 degrees Celsius.
- What's the difference between the different SHC water heater models? The only difference is in the storage tank capacity, otherwise they both work the same.
- Can I install the SHC water heaters with my existing sink mixer? Yes, the SHC water heaters are mains pressure storage water heaters and can be used with all WELS rated tap-ware including low flow taps.
- Can I connect two taps to the SHC mains pressure water heater? Yes, the SHC water heaters are designed as a multipoint of use water heater and can be operated with multiple taps.
- Do these water heaters create hot water that is hot enough to make tea and coffee? No, the SHC is designed to provide hot and cold water to a sink. These units are not a boiling or chilled system.
- What happens after I order the unit and pay? We will be in contact with you to confirm the order, delivery address and timeframe, and any other questions you may have.
- How long until I receive my order, and is there a delivery fee? Within Australian state/territory capital cities delivery is free (excluding Darwin), and your order will usually arrive within 3 business days. For orders outside of capital cities, we offer a flat-rate fee of $200 for delivery.
Additional Products
- Highly Effective Water Filtration Systems by Stiebel Eltron available at Stiebel Store
- Complete Installation of this Water Heater (Perth only) from $500.00+GST by Euroheat Australia
Technical Data
| Model number | SHC 10 | SHC 15 |
| Tank Capacity | 10L | 15L |
| Rated Output (415V) | 1.6kW | 1.6kW |
| Rated Current (415V) | 6.8A | 6.8A |
| Connection | 1/N/PE | 1/N/PE |
| Fuse Protection | 10A | 10A |
| Mixed water volume at 40°C | 15.3L | 23L |
| Temperature Settings | 60°C | 60°C |
| Water Connections | G 1/2 A | G 1/2 A |
| Max. Permissible Pressure | 700kPa | 700kPa |
| Supplied PTR Valve | 700kPa | 700kPa |
| IP Rating | IP24 D | IP24 D |
| Height | 498mm | 523mm |
| Width | 280mm | 320mm |
| Depth | 270mm | 318mm |
| Weight | 17.2Kg | 24.0Kg |
| Colour | White | White |
Downloads
SHC AU Operation and Installation Guide PDF 2.43 MB
SHC 10 AU / SHC 15 AU Warranty PDF 110.93 kB
STIEBEL ELTRON Brochure SHC PDF 830.58 kB
Faq
EnergyLabs processes all orders within one day, and deliveries usually occur within 3 – 5 business days.
EnergyLabs ships from distribution centres in all states and mainland territories (exc. NT)
Shipping is free to Australian Capital Cities (Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart) excluding Darwin. For shipping outside of capital cities we offer delivery at a flat rate of $200.
All products offered by EnergyLabs come with manufacturer’s warranties that generally vary from 2 to 5 years depending on the product and brand.
For your piece of mind only reputable equipment that we know to be of good quality and reliable are offered by EnergyLabs.
Yes, we will do our best to deliver on a specific date, if you request it, but unfortunately cannot guarantee it.
EnergyLabs parent company Euroheat Australia offers installation in Perth and greater WA. EnergyLabs is happy to recommend good installers in your home city or state.